차량 모델, 타이어 크기 또는 림별 검색 양식 차량의 장착 데이터를 가져오거나 기준에 맞는 차량을 찾으려면 아래 탭을 선택하십시오.

일치하는 휠을 찾기 위해 제조사, 연식 및 모델 지정:
일치하는 차량을 찾기 위해 아래 필드 값 지정:
일치하는 차량을 찾기 위해 아래 필드 값 지정:
일치하는 차량을 찾기 위해 아래 필드 값 지정:
±
±

2013 아우디 SQ5 휠 장착 가이드 2013 아우디 SQ5에 맞는 휠 및 타이어 찾기

아우디
아래에서 2013 아우디 SQ5의 차량 개조를 선택하고 표를 참조하여 휠 크기, 타이어 크기, 볼트 패턴(PCD), 림 오프셋 및 기타 휠 장착 매개 변수를 확인하십시오. 필요한 경우 판매 분포 지역별로 필터링할 수 있습니다.

아우디 SQ5 8R [2012 .. 2017]

세대
지역별 필터링:
오세아니아 AUDM
캐나다 CDM
유럽 EUDM
일본 JDM
중동 MEDM
러시아 RUS
동남아시아 SAM
미국 USDM

2013 아우디 SQ5 8R [2012 .. 2017] - 개조

아우디 SQ5 8R [2012 .. 2017] 3.0TDi

308 hp
EUDM
  • 세대: 8R [2012 .. 2017] [EUDM]
  • 제작: [2012 .. 2016]
  • 판매 지역: 유럽
  • 파워: 308 hp | 230 kW | 313 PS
  • 엔진: , Diesel
  • 센터 보어 / 허브 보어:
  • 볼트 패턴 (PCD):
  • 휠 고정 장치: 휠 볼트
  • 스레드 크기:
  • 휠 조임 토크:
    알 수 없음
타이어     오프셋 범위 mm 백스페이스 mm 인치 타이어 중량 kg lb 타이어 공기압(앞/뒤) bar psi
OE 235/55R19 102H 8Jx19 ET39 37 - 41 153 6.02 13.5 29.8 2.3 33
OE 255/45ZR20 101W 8.5Jx20 ET33 31 - 35 154 6.06 13.3 29.4 2.5 36
255/40ZR21 101W 8.5Jx21 ET33 154 6.06 12.9 28.5 2.5 36
265/35ZR22 100Z 9Jx22 ET28 155 6.10 12.8 28.3 2.7 39

아우디 SQ5 8R [2012 .. 2017] 3.0TDi

322 hp
AUDM
  • 세대: 8R [2012 .. 2017] [EUDM]
  • 제작: [2012 .. 2016]
  • 판매 지역: 오세아니아
  • 파워: 322 hp | 240 kW | 326 PS
  • 엔진: , Diesel
  • 센터 보어 / 허브 보어:
  • 볼트 패턴 (PCD):
  • 휠 고정 장치: 휠 볼트
  • 스레드 크기:
  • 휠 조임 토크:
    알 수 없음
타이어     오프셋 범위 mm 백스페이스 mm 인치 타이어 중량 kg lb 타이어 공기압(앞/뒤) bar psi
OE 255/45R20 101V 8.5Jx20 ET33 31 - 35 154 6.06 13.3 29.4 2.5 36
255/40ZR21 101W 8.5Jx21 ET33 154 6.06 12.9 28.5 2.5 36
265/35ZR22 100Y 9Jx22 ET28 155 6.10 12.8 28.3 2.7 39

아우디 SQ5 8R [2012 .. 2017] 3.0TFSi

349 hp
SAM
  • 세대: 8R [2012 .. 2017] [EUDM]
  • 제작: [2012 .. 2016]
  • 판매 지역: 동남아시아
  • 파워: 349 hp | 260 kW | 354 PS
  • 엔진: , Petrol
  • 센터 보어 / 허브 보어:
  • 볼트 패턴 (PCD):
  • 휠 고정 장치: 휠 볼트
  • 스레드 크기:
  • 휠 조임 토크:
    알 수 없음
타이어     오프셋 범위 mm 백스페이스 mm 인치 타이어 중량 kg lb 타이어 공기압(앞/뒤) bar psi
OE 101W 31 - 35 154 6.06 13.3 29.4 2.5 36
101W 154 6.06 12.9 28.5 2.5 36
100Y 152 5.98 12.4 27.2 2.7 39

아우디 SQ5 8R [2012 .. 2017] 3.0TFSi

349 hp
USDM CDM
  • 세대: 8R [2012 .. 2017] [EUDM]
  • 제작: [2013 .. 2017]
  • 판매 지역: 미국, 캐나다, 유럽, 러시아, 중동
  • 파워: 349 hp | 260 kW | 354 PS
  • 엔진: 3.0 L, , Petrol
  • 센터 보어 / 허브 보어:
  • 볼트 패턴 (PCD):
  • 휠 고정 장치: 휠 볼트
  • 스레드 크기:
  • 휠 조임 토크:
    알 수 없음
타이어     오프셋 범위 mm 백스페이스 mm 인치 타이어 중량 kg lb 타이어 공기압(앞/뒤) bar psi
OE 102H 37 - 41 153 6.02 13.5 29.8 2.3 33
OE 101W 31 - 35 154 6.06 13.3 29.4 2.5 36
101W 154 6.06 12.9 28.5 2.5 36
100Z 155 6.10 12.8 28.3 2.7 39

아우디 SQ5 8R [2012 .. 2017] 3.0TFSi (ABA-8RCTXF)

349 hp
JDM
  • 모델 코드 / 일본 : ABA-8RCTXF
  • 세대: 8R [2012 .. 2017] [EUDM]
  • 제작: [2013 .. 2016]
  • 판매 지역: 일본
  • 파워: 349 hp | 260 kW | 354 PS
  • 엔진: , Petrol
  • 센터 보어 / 허브 보어:
  • 볼트 패턴 (PCD):
  • 휠 고정 장치: 휠 볼트
  • 스레드 크기:
  • 휠 조임 토크:
    알 수 없음
타이어     오프셋 범위 mm 백스페이스 mm 인치 타이어 중량 kg lb 타이어 공기압(앞/뒤) bar psi
OE 101W 31 - 35 154 6.06 13.3 29.4 2.5 36
101W 154 6.06 12.9 28.5 2.5 36
100Z 152 5.98 12.4 27.2 2.7 39

다른 모델 연식은 아우디 SQ5 휠 장착 정보를 참조하십시오.
2024 2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012
페이지 업데이트: 3월 2, 2021, 6:25 오전
타이어 용어집
이 페이지에서 볼 수 있는 타이어 용어

The size of the hole in the center of a wheel is known as the center bore or centerbore.

- Recommended for winter
- Run-flat tires
- Link comes to the calculator page for comparison
- Steel wheels
OE - Original Equipment
- Tire Pressure
- Front axle
- Rear axle

Offset is the distance in millimetres from the centre line of the wheel to the wheel’s mounting face. Given that the mounting face can be either in front of or behind the centreline, the offset can be either neutral, positive or negative.

The Pitch Circle Diameter (PCD) is the diameter of the circle which passes through the centre of all the studs, wheel bolts or wheel rim holes

hp - Mechanical horsepower
kW - Kilowatts
PS - Metric horsepower

Wheel backspace is the distance from a wheel's mounting surface to the back edge of the wheel.

Tire pressure is a vehicle's recommended cold tire inflation pressure. It is measured in bars or PSI (pounds per square inch).

A sales region is a global automotive region in which a vehicle was officially sold or is still being sold.

Ex.: 7J x 15 Rim width (inches) x rim diameter (inches)

ISO standard Ex.: M12 x 1.25 Nominal diameter (mm) x pitch (mm)

UN-series Ex.: 9/16" - 18 UNF Thread size (in) - thread pitch
UNF - Unified National Fine Thread

Example: 215/55 R16 91 T

215 is the tire width in mm
55 is the ratio of profile height to width or simply 'profile'. With the same width, the larger this indicator, the higher the tire will be and vice versa
16 - diameter of the wheel (disk) in inches. (It is the diameter, not the radius!). This is the inner size of the tire or the outer size of the rim
91 - load index. This is the level of maximum permissible load on one wheel
T - tire speed index

The method of attaching a wheel to a hub: wheel nuts or wheel bolts

The torque value specified by the manufacturer for wheel bolts or wheel nuts, which is to be set when tightening on the torque tool (torque setting). A rotational force given in Newton metres (Nm) or foot-pounds (ft-lbs), wheel torque measures lug nut / bolts tightness

Ply rating denotes tire strength and load capacity, based on its layer count.
Load Range
Ply
Rating
Max. Load Pressure

The tires included with a new vehicle when it is purchased. OE tires are specifically chosen by the vehicle manufacturer to make the most of the vehicle's performance characteristics.

Load Index represents the maximum load a tire can carry, while Speed Rating indicates the maximum safe speed.
Load Index
Speed Rating
Capacity
Max Speed