차량 모델, 타이어 크기 또는 림별 검색 양식 차량의 장착 데이터를 가져오거나 기준에 맞는 차량을 찾으려면 아래 탭을 선택하십시오.

일치하는 휠을 찾기 위해 제조사, 연식 및 모델 지정:
일치하는 차량을 찾기 위해 아래 필드 값 지정:
일치하는 차량을 찾기 위해 아래 필드 값 지정:
일치하는 차량을 찾기 위해 아래 필드 값 지정:
±
±

부가티 시론

2015 .. 2022 세대. 휠 장착 가이드 부가티 시론 2015 .. 2022에 맞는 휠 및 타이어 찾기

부가티
아래에서 부가티 시론 2015 .. 2022의 차량 개조를 선택하십시오. 필요한 경우 판매 지역별로 필터링할 수 있습니다.
세대
지역별 필터링:
캐나다 CDM
중국 CHDM
유럽 EUDM
일본 JDM
중동 MEDM
미국 USDM

부가티 시론 2015 .. 2022 - 개조

부가티 시론 2015 .. 2022 8.0i

1479 hp
USDM CDM
  • 세대: 2015 .. 2022 [EUDM]
  • 제작: [2015 .. 2022]
  • 판매 지역: 미국, 캐나다, 유럽, 일본, 중국, 중동
  • 파워: 1479 hp | 1103 kW | 1500 PS
  • 엔진: 8.0 L, , Petrol
  • 센터 보어 / 허브 보어:
  • 볼트 패턴 (PCD):
  • 휠 고정 장치: 휠 볼트
  • 스레드 크기:
  • 휠 조임 토크:
    알 수 없음
타이어     오프셋 범위 mm 백스페이스 mm 인치 타이어 중량 kg lb 타이어 공기압(앞/뒤) bar psi
OE 285/30ZR20 99Y 앞 차축
355/25ZR21 107Y 뒷 차축
10Jx20 ET55
13.5Jx21 ET71.5
53 - 57 69.5 - 73.5 195
256
7.68
10.08
12.0
14.7
26.5
32.5

부가티 시론 2015 .. 2022 8.0i

1578 hp
USDM CDM
  • 세대: 2015 .. 2022 [EUDM]
  • 제작: [2022 .. 2022]
  • 판매 지역: 미국, 캐나다, 유럽, 중국, 중동
  • 파워: 1578 hp | 1176.8 kW | 1600 PS
  • 엔진: 8.0 L, , Petrol
  • 트림 레벨: Super Sport
  • 센터 보어 / 허브 보어:
  • 볼트 패턴 (PCD):
  • 휠 고정 장치: 휠 볼트
  • 스레드 크기:
  • 휠 조임 토크:
    알 수 없음
타이어     오프셋 범위 mm 백스페이스 mm 인치 타이어 중량 kg lb 타이어 공기압(앞/뒤) bar psi
OE 285/30ZR20 99Y 앞 차축
355/25ZR21 107Y 뒷 차축
10Jx20 ET55
13.5Jx21 ET71.5
53 - 57 69.5 - 73.5 195
256
7.68
10.08
12.0
14.7
26.5
32.5
페이지 업데이트: 11월 14, 2022, 4:18 오후
타이어 용어집
이 페이지에서 볼 수 있는 타이어 용어

The size of the hole in the center of a wheel is known as the center bore or centerbore.

- Recommended for winter
- Run-flat tires
- Link comes to the calculator page for comparison
- Steel wheels
OE - Original Equipment
- Tire Pressure
- Front axle
- Rear axle

Offset is the distance in millimetres from the centre line of the wheel to the wheel’s mounting face. Given that the mounting face can be either in front of or behind the centreline, the offset can be either neutral, positive or negative.

Wheel backspace is the distance from a wheel's mounting surface to the back edge of the wheel.

The Pitch Circle Diameter (PCD) is the diameter of the circle which passes through the centre of all the studs, wheel bolts or wheel rim holes

hp - Mechanical horsepower
kW - Kilowatts
PS - Metric horsepower

Tire pressure is a vehicle's recommended cold tire inflation pressure. It is measured in bars or PSI (pounds per square inch).

A sales region is a global automotive region in which a vehicle was officially sold or is still being sold.

Ex.: 7J x 15 Rim width (inches) x rim diameter (inches)

ISO standard Ex.: M12 x 1.25 Nominal diameter (mm) x pitch (mm)

UN-series Ex.: 9/16" - 18 UNF Thread size (in) - thread pitch
UNF - Unified National Fine Thread

Example: 215/55 R16 91 T

215 is the tire width in mm
55 is the ratio of profile height to width or simply 'profile'. With the same width, the larger this indicator, the higher the tire will be and vice versa
16 - diameter of the wheel (disk) in inches. (It is the diameter, not the radius!). This is the inner size of the tire or the outer size of the rim
91 - load index. This is the level of maximum permissible load on one wheel
T - tire speed index

The method of attaching a wheel to a hub: wheel nuts or wheel bolts

The torque value specified by the manufacturer for wheel bolts or wheel nuts, which is to be set when tightening on the torque tool (torque setting). A rotational force given in Newton metres (Nm) or foot-pounds (ft-lbs), wheel torque measures lug nut / bolts tightness

The tires included with a new vehicle when it is purchased. OE tires are specifically chosen by the vehicle manufacturer to make the most of the vehicle's performance characteristics.