차량 모델, 타이어 크기 또는 림별 검색 양식 차량의 장착 데이터를 가져오거나 기준에 맞는 차량을 찾으려면 아래 탭을 선택하십시오.

일치하는 휠을 찾기 위해 제조사, 연식 및 모델 지정:
일치하는 차량을 찾기 위해 아래 필드 값 지정:
일치하는 차량을 찾기 위해 아래 필드 값 지정:
일치하는 차량을 찾기 위해 아래 필드 값 지정:
±
±

2015 Fiat 500 휠 장착 가이드 2015 Fiat 500에 맞는 휠 및 타이어 찾기

Fiat
2015은(는) 구세대 Fiat 500과(와) 신세대 사이의 과도기적인 해입니다. 필요한 차량 세대를 선택하고 지역을 지정하여 정보를 볼 때 오류를 제거하십시오.
세대
세대

Fiat 500 312 [2007 .. 2015]

판매 지역을 지정하여 검색 범위를 좁히세요:

다른 모델 연식은 Fiat 500 휠 장착 정보를 참조하십시오.
2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 1975 1974 1973 1972 1971 1970 1969 1968 1967 1966 1965 1964 1963 1962 1961 1960 1959 1958 1957
페이지 업데이트: 2월 18, 2021, 1:25 오후
타이어 용어집
이 페이지에서 볼 수 있는 타이어 용어

The size of the hole in the center of a wheel is known as the center bore or centerbore.

- Recommended for winter
- Run-flat tires
- Link comes to the calculator page for comparison
- Steel wheels
OE - Original Equipment
- Tire Pressure
- Front axle
- Rear axle

Offset is the distance in millimetres from the centre line of the wheel to the wheel’s mounting face. Given that the mounting face can be either in front of or behind the centreline, the offset can be either neutral, positive or negative.

Wheel backspace is the distance from a wheel's mounting surface to the back edge of the wheel.

The Pitch Circle Diameter (PCD) is the diameter of the circle which passes through the centre of all the studs, wheel bolts or wheel rim holes

hp - Mechanical horsepower
kW - Kilowatts
PS - Metric horsepower

Tire pressure is a vehicle's recommended cold tire inflation pressure. It is measured in bars or PSI (pounds per square inch).

A sales region is a global automotive region in which a vehicle was officially sold or is still being sold.

Ex.: 7J x 15 Rim width (inches) x rim diameter (inches)

ISO standard Ex.: M12 x 1.25 Nominal diameter (mm) x pitch (mm) UN-series Ex.: 9/16" - 18 UNF Thread size (in) - thread pitch

UNF - Unified National Fine Thread

Example: 215/55 R16 91 T

215 is the tire width in mm
55 is the ratio of profile height to width or simply 'profile'. With the same width, the larger this indicator, the higher the tire will be and vice versa
16 - diameter of the wheel (disk) in inches. (It is the diameter, not the radius!). This is the inner size of the tire or the outer size of the rim
91 - load index. This is the level of maximum permissible load on one wheel
T - tire speed index

The method of attaching a wheel to a hub: wheel nuts or wheel bolts

The tires included with a new vehicle when it is purchased. OE tires are specifically chosen by the vehicle manufacturer to make the most of the vehicle's performance characteristics.