2019 기아 Telluride 휠 장착 가이드 2019 기아 Telluride에 맞는 휠 및 타이어 찾기
기아 Telluride ON [2019 .. 2023]
2019 기아 Telluride ON [2019 .. 2023] - 개조
기아 Telluride ON [2019 .. 2023] 3.8 GDi
- 세대: ON [2019 .. 2023]
- 제작: [2019 .. 2022]
판매 지역: , ,
파워: 291 hp | 217 kW | 295 PS
- 엔진: 3.8L, , Petrol
- 트림 레벨: LX, S, EX, SX, SX Limited
|mm||mm 인치||kg lb||bar psi|
|OE 245/60R18 105H||7.5Jx18 ET49.5||47.5 - 51.5||157 6.18||32.2 71.0||2.4 35|
|OE 245/50R20 102V||7.5Jx20 ET49.5||47.5 - 51.5||157 6.18||30.5 67.2||2.4 35|
|245/55R19 103V||7.5Jx19 ET50||158 6.22||31.7 69.8||2.4 35|
|255/45R21 102W||8Jx21 ET50||164 6.46||30.4 67.1||2.4 35|
The size of the hole in the center of a wheel is known as the center bore or centerbore.
- Recommended for winter
- Run-flat tires
- Link comes to the calculator page for comparison
- Steel wheels
OE - Original Equipment
- Tire Pressure
- Front axle
- Rear axle
Offset is the distance in millimetres from the centre line of the wheel to the wheel’s mounting face. Given that the mounting face can be either in front of or behind the centreline, the offset can be either neutral, positive or negative.
Backspace is the distance from a wheel's mounting surface to the back edge of the wheel.
The Pitch Circle Diameter (PCD) is the diameter of the circle which passes through the centre of all the studs, wheel bolts or wheel rim holes
hp - Mechanical horsepower
kW - Kilowatts
PS - Metric horsepower
Tire pressure is a vehicle's recommended cold tire inflation pressure. It is measured in bars or PSI (pounds per square inch).
A sales region is a global automotive region in which a vehicle was officially sold or is still being sold.
Ex.: 7J x 15 Rim width (inches) x rim diameter (inches)
ISO standard Ex.: M12 x 1.25 Nominal diameter (mm) x pitch (mm) UN-series Ex.: 9/16" - 18 UNF Thread size (in) - thread pitch
UNF - Unified National Fine Thread
The method of attaching a wheel to a hub: wheel nuts or wheel bolts
Torque settings for wheel bolts or wheel nuts
The tires included with a new vehicle when it is purchased. OE tires are specifically chosen by the vehicle manufacturer to make the most of the vehicle's performance characteristics.