메르세데스-벤츠 S 클래스 W222 [2013 .. 2017] 일본 휠 장착 가이드
W222 [2013 .. 2017] 일본
세단
메르세데스-벤츠 S 클래스 W222 [2013 .. 2017] - 개조
Petrol:
S 600 (CBA-222176C) V12 523hp메르세데스-벤츠 S 클래스 W222 [2013 .. 2017] S 600 (CBA-222176C)
523 hp- 모델 코드 / 일본 : CBA-222176C
- 세대: W222 [2013 .. 2017]
- 제작: [2014 .. 2017]
-
판매 지역: 일본
-
파워: 523 hp | 390 kW | 530 PS
- 엔진: , Petrol
-
센터 보어 / 허브 보어:
-
볼트 패턴 (PCD):
-
휠 고정 장치: 휠 볼트
-
스레드 크기:
-
휠 조임 토크:
| 타이어 | 림 | 오프셋 범위 mm | 백스페이스 mm 인치 | 타이어 중량 kg lb |
bar psi
|
||
|---|---|---|---|---|---|---|---|
OE
245/45ZR19
102Y
275/40ZR19 101Y 
|
8.5Jx19 ET36
9.5Jx19 ET43.5 |
34 - 38 41.5 - 45.5 |
157 177 6.18 6.97 |
12.1 13.1 26.7 28.9 |
2.6 38 |
OE
|
|
| OE 245/45R19 102V | 8.5Jx19 ET36 | 34 - 38 | 157 6.18 | 12.1 26.7 | 2.6 38 |
OE
|
|
|
OE
245/45ZR19
102Y
275/40ZR19 101Y
|
8.5Jx19 ET38
9.5Jx19 ET38 |
36 - 40 36 - 40 |
159 171 6.26 6.73 |
12.1 13.1 26.7 28.9 |
2.6 38 |
OE
|
|
| OE 245/45R19 102V | 8.5Jx19 ET38 | 36 - 40 | 159 6.26 | 12.1 26.7 | 2.6 38 |
OE
|
|
|
245/40ZR20
99Y
275/35ZR20 102Y
|
8.5Jx20 ET36
9.5Jx20 ET43.5 |
157 177 6.18 6.97 |
11.8 12.5 26.0 27.5 |
2.6 2.8 38 41 |
|
||
|
245/40ZR20
99Y
275/35ZR20 102Y
|
8.5Jx20 ET36.5
9.5Jx20 ET44 |
157 177 6.18 6.97 |
11.8 12.5 26.0 27.5 |
2.6 2.8 38 41 |
|
||
|
245/40ZR20
99Y
275/35ZR20 102Y
|
8.5Jx20 ET38
9.5Jx20 ET38 |
159 171 6.26 6.73 |
11.8 12.5 26.0 27.5 |
2.6 2.8 38 41 |
|
||
|
245/35ZR21
98Y
275/30ZR21 100Y
|
8.5Jx21 ET35
9.5Jx21 ET40 |
156 173 6.14 6.81 |
11.3 11.8 25.0 26.1 |
2.7 2.9 39 42 |
|
||
|
255/35ZR21
99Y
285/30ZR21 101Y
|
9Jx21 ET30
10Jx21 ET35 |
157 175 6.18 6.89 |
11.9 12.5 26.2 27.5 |
2.7 2.9 39 42 |
|
The size of the hole in the center of a wheel is known as the center bore or centerbore.
- Recommended for winter
- Run-flat tires
- Link comes to the calculator page for comparison
- Steel wheels
OE - Original Equipment
- Tire Pressure
- Front axle
- Rear axle
Offset is the distance in millimetres from the centre line of the wheel to the wheel’s mounting face. Given that the mounting face can be either in front of or behind the centreline, the offset can be either neutral, positive or negative.
The Pitch Circle Diameter (PCD) is the diameter of the circle which passes through the centre of all the studs, wheel bolts or wheel rim holes
hp - Mechanical horsepower
kW - Kilowatts
PS - Metric horsepower
Wheel backspace is the distance from a wheel's mounting surface to the back edge of the wheel.
Tire pressure is a vehicle's recommended cold tire inflation pressure. It is measured in bars or PSI (pounds per square inch).
A sales region is a global automotive region in which a vehicle was officially sold or is still being sold.
Ex.: 7J x 15 Rim width (inches) x rim diameter (inches)
ISO standard Ex.: M12 x 1.25 Nominal diameter (mm) x pitch (mm)
UN-series Ex.: 9/16" - 18 UNF
Thread size (in) - thread pitch
UNF - Unified National Fine Thread
Example: 215/55 R16 91 T
215 is the tire width in mm
55 is the ratio of profile height to width or simply 'profile'. With the same width, the larger this indicator, the higher the tire will be and vice versa
16 - diameter of the wheel (disk) in inches. (It is the diameter, not the radius!). This is the inner size of the tire or the outer size of the rim
91 - load index. This is the level of maximum permissible load on one wheel
T - tire speed index
The method of attaching a wheel to a hub: wheel nuts or wheel bolts
The torque value specified by the manufacturer for wheel bolts or wheel nuts, which is to be set when tightening on the torque tool (torque setting). A rotational force given in Newton metres (Nm) or foot-pounds (ft-lbs), wheel torque measures lug nut / bolts tightness
Rating
The tires included with a new vehicle when it is purchased. OE tires are specifically chosen by the vehicle manufacturer to make the most of the vehicle's performance characteristics.
