차량 모델, 타이어 크기 또는 림별 검색 양식 차량의 장착 데이터를 가져오거나 기준에 맞는 차량을 찾으려면 아래 탭을 선택하십시오.

일치하는 휠을 찾기 위해 제조사, 연식 및 모델 지정:
일치하는 차량을 찾기 위해 아래 필드 값 지정:
일치하는 차량을 찾기 위해 아래 필드 값 지정:
일치하는 차량을 찾기 위해 아래 필드 값 지정:
±
±

2019 Changan CS55 Plus 휠 장착 가이드 2019 Changan CS55 Plus에 맞는 휠 및 타이어 찾기

Changan
아래에서 2019 Changan CS55 Plus의 차량 개조를 선택하고 표를 참조하여 휠 크기, 타이어 크기, 볼트 패턴(PCD), 림 오프셋 및 기타 휠 장착 매개 변수를 확인하십시오. 필요한 경우 판매 분포 지역별로 필터링할 수 있습니다.

Changan CS55 Plus I [2019 .. 2021]

세대
지역별 필터링:
중국 CHDM

2019 Changan CS55 Plus I [2019 .. 2021] - 개조

Changan CS55 Plus I [2019 .. 2021] 1.5T

178 hp
CHDM
  • 세대: I [2019 .. 2021]
  • 제작: [2019 .. 2021]
  • 판매 지역: 중국
  • 파워: 178 hp | 133 kW | 181 PS
  • 엔진: 1.5 L, , Petrol
  • 센터 보어 / 허브 보어:
  • 볼트 패턴 (PCD): ()
  • 휠 고정 장치: 러그 너트
  • 스레드 크기:
  • 휠 조임 토크:
타이어     오프셋 범위 mm 백스페이스 mm 인치 타이어 중량 kg lb 타이어 공기압(앞/뒤) bar psi
OE 225/60R17 99T 7Jx17 ET45 43 - 47 147 5.79 11.2 24.8 2.2 32
OE 225/55R18 98H 7Jx18 ET45 43 - 47 147 5.79 11.2 24.6 2.2 32
225/50R19 100H 7Jx19 ET45 147 5.79 11.1 24.4 2.3 33
245/45R19 98H 7.5Jx19 ET45 153 6.02 11.8 25.9 2.3 33

다른 모델 연식은 Changan CS55 Plus 휠 장착 정보를 참조하십시오.
2025 2024 2023 2022 2021 2020 2019
페이지 업데이트: 13/05/2021 14:21
타이어 용어집
이 페이지에서 볼 수 있는 타이어 용어

The size of the hole in the center of a wheel is known as the center bore or centerbore.

- Recommended for winter
- Run-flat tires
- Link comes to the calculator page for comparison
- Steel wheels
OE - Original Equipment
- Tire Pressure
- Front axle
- Rear axle

Offset is the distance in millimetres from the centre line of the wheel to the wheel’s mounting face. Given that the mounting face can be either in front of or behind the centreline, the offset can be either neutral, positive or negative.

The Pitch Circle Diameter (PCD) is the diameter of the circle which passes through the centre of all the studs, wheel bolts or wheel rim holes

hp - Mechanical horsepower
kW - Kilowatts
PS - Metric horsepower

Wheel backspace is the distance from a wheel's mounting surface to the back edge of the wheel.

Tire pressure is a vehicle's recommended cold tire inflation pressure. It is measured in bars or PSI (pounds per square inch).

A sales region is a global automotive region in which a vehicle was officially sold or is still being sold.

Ex.: 7J x 15 Rim width (inches) x rim diameter (inches)

ISO standard Ex.: M12 x 1.25 Nominal diameter (mm) x pitch (mm)

UN-series Ex.: 9/16" - 18 UNF Thread size (in) - thread pitch
UNF - Unified National Fine Thread

Example: 215/55 R16 91 T

215 is the tire width in mm
55 is the ratio of profile height to width or simply 'profile'. With the same width, the larger this indicator, the higher the tire will be and vice versa
16 - diameter of the wheel (disk) in inches. (It is the diameter, not the radius!). This is the inner size of the tire or the outer size of the rim
91 - load index. This is the level of maximum permissible load on one wheel
T - tire speed index

The method of attaching a wheel to a hub: wheel nuts or wheel bolts

The torque value specified by the manufacturer for wheel bolts or wheel nuts, which is to be set when tightening on the torque tool (torque setting). A rotational force given in Newton metres (Nm) or foot-pounds (ft-lbs), wheel torque measures lug nut / bolts tightness

Ply rating denotes tire strength and load capacity, based on its layer count.
Load Range
Ply
Rating
Max. Load Pressure

The tires included with a new vehicle when it is purchased. OE tires are specifically chosen by the vehicle manufacturer to make the most of the vehicle's performance characteristics.

Load Index represents the maximum load a tire can carry, while Speed Rating indicates the maximum safe speed.
Load Index
Speed Rating
Capacity
Max Speed