쉐보레 콜벳 C4 [1984 .. 1996] 미국 휠 장착 가이드
C4 [1984 .. 1996] 미국
쉐보레 콜벳 C4 [1984 .. 1996] - 개조
Petrol:
5.7 Convertible V8 330hp 5.7 V8 300hp 5.7 V8 300hp 5.7 쿠페 V8 330hp 5.7 350cid V8 240hp 5.7 350cid V8 205hp 5.7 350cid V8 230hp 5.7 350cid V8 240hp 5.7 350cid V8 245hp 5.7 350cid V8 245hp 5.7 350cid V8 250hp 5.7 350cid Z51 V8 205hp 5.7 350cid Z51 V8 230hp 5.7 350cid Z51 V8 240hp 5.7 350cid Z51 V8 245hp 5.7 350cid Z52 V8 245hp 5.7 Z07 V8 300hp 5.7 Z51 V8 300hp 5.7 ZR1 V8 405hp 5.7 ZR1 V8 375hp쉐보레 콜벳 C4 [1984 .. 1996] 5.7
330 hp- 세대: C4 [1984 .. 1996]
- 제작: [1996 .. 1996]
-
판매 지역: 미국
-
파워: 330 hp | 246 kW | 334 PS
- 엔진: 5.7 L, , Petrol
- 트림 레벨: Grand Sport
- 차체 유형: Convertible
-
센터 보어 / 허브 보어:
-
볼트 패턴 (PCD): ()
-
휠 고정 장치: 러그 너트
-
스레드 크기:
-
휠 조임 토크:
mm | mm 인치 | kg lb | bar psi | ||||
---|---|---|---|---|---|---|---|
OE
255/45R17
285/40R17 |
9.5Jx17 ET56
11Jx17 ET36 |
54 - 58 34 - 38 |
189 188 7.44 7.40 |
11.5 12.6 25.3 27.9 |
2.1 30 |
OE
|
쉐보레 콜벳 C4 [1984 .. 1996] 5.7
300 hp쉐보레 콜벳 C4 [1984 .. 1996] 5.7
300 hp쉐보레 콜벳 C4 [1984 .. 1996] 5.7
330 hp쉐보레 콜벳 C4 [1984 .. 1996] 5.7 350cid
240 hp쉐보레 콜벳 C4 [1984 .. 1996] 5.7 350cid
205 hp쉐보레 콜벳 C4 [1984 .. 1996] 5.7 350cid
230 hp쉐보레 콜벳 C4 [1984 .. 1996] 5.7 350cid
240 hp쉐보레 콜벳 C4 [1984 .. 1996] 5.7 350cid
245 hp쉐보레 콜벳 C4 [1984 .. 1996] 5.7 350cid
245 hp쉐보레 콜벳 C4 [1984 .. 1996] 5.7 350cid
250 hp쉐보레 콜벳 C4 [1984 .. 1996] 5.7 350cid Z51
205 hp쉐보레 콜벳 C4 [1984 .. 1996] 5.7 350cid Z51
230 hp쉐보레 콜벳 C4 [1984 .. 1996] 5.7 350cid Z51
240 hp쉐보레 콜벳 C4 [1984 .. 1996] 5.7 350cid Z51
245 hp쉐보레 콜벳 C4 [1984 .. 1996] 5.7 350cid Z52
245 hp쉐보레 콜벳 C4 [1984 .. 1996] 5.7 Z07
300 hp쉐보레 콜벳 C4 [1984 .. 1996] 5.7 Z51
300 hp쉐보레 콜벳 C4 [1984 .. 1996] 5.7 ZR1
405 hpThe size of the hole in the center of a wheel is known as the center bore or centerbore.
- Recommended for winter
- Run-flat tires
- Link comes to the calculator page for comparison
- Steel wheels
OE - Original Equipment
- Tire Pressure
- Front axle
- Rear axle
Offset is the distance in millimetres from the centre line of the wheel to the wheel’s mounting face. Given that the mounting face can be either in front of or behind the centreline, the offset can be either neutral, positive or negative.
The Pitch Circle Diameter (PCD) is the diameter of the circle which passes through the centre of all the studs, wheel bolts or wheel rim holes
hp - Mechanical horsepower
kW - Kilowatts
PS - Metric horsepower
Wheel backspace is the distance from a wheel's mounting surface to the back edge of the wheel.
Tire pressure is a vehicle's recommended cold tire inflation pressure. It is measured in bars or PSI (pounds per square inch).
A sales region is a global automotive region in which a vehicle was officially sold or is still being sold.
Ex.: 7J x 15 Rim width (inches) x rim diameter (inches)
ISO standard Ex.: M12 x 1.25 Nominal diameter (mm) x pitch (mm)
UN-series Ex.: 9/16" - 18 UNF
Thread size (in) - thread pitch
UNF - Unified National Fine Thread
Example: 215/55 R16 91 T
215 is the tire width in mm
55 is the ratio of profile height to width or simply 'profile'. With the same width, the larger this indicator, the higher the tire will be and vice versa
16 - diameter of the wheel (disk) in inches. (It is the diameter, not the radius!). This is the inner size of the tire or the outer size of the rim
91 - load index. This is the level of maximum permissible load on one wheel
T - tire speed index
The method of attaching a wheel to a hub: wheel nuts or wheel bolts
The torque value specified by the manufacturer for wheel bolts or wheel nuts, which is to be set when tightening on the torque tool (torque setting). A rotational force given in Newton metres (Nm) or foot-pounds (ft-lbs), wheel torque measures lug nut / bolts tightness
Rating
The tires included with a new vehicle when it is purchased. OE tires are specifically chosen by the vehicle manufacturer to make the most of the vehicle's performance characteristics.